Interior

First in the interior i will start with the rear seat delete. To do this might be a little difficult i would recomend with taking out your front seats first. This is done by un-bolting the blocks that secure the seat on the rails, you should then unconnect the blocks from the seat. You should now slide the blocks off the rails. If you have power seats, you should un-screw the panel with the seat controlls this is very simple. Now you should be able to pull the seat out of the car. After this is done you will move to the back seats. You will have to open up your trunk to acess the bolts for the top of the back seats, un-bolt both seats their should be 4 or 5 bolts per seat. After that u should be able to remove the back rest part of the back seats next for the bottom unbolt the rails from the floor this may require you to jack up the car and unblot them from the bottom. Once the bolts are out of the rails remove the bottom part of your seats. Then take your rear seat delete kit and follow the instructions, it shouldn't requir any tools, and should come with all the hardware you need. To do this you will take both panels and place them to line up with the holes from the old seats where the bolts went. Now their should be 16 interior pins. the will insert in the old bolt holes. You have now completed the rear seat delete, all you have to do now is replace the front seats. Make sure they are secure, both top and bottom bolts on the blocks, and be sure to put the controll panel back onto your seat.